Avalon vt-737sp Pre-Amp

Avalon vt-737sp Pre-Amp
Avalon vt-737sp Pre-Amp
Avalon vt-737sp Pre-Amp
Avalon vt-737sp Pre-Amp

Avalon vt-737sp Pre-Amp
The Ultimate In Mic Pre Performance and Control! The VT-737sp brings its magic touch to everything in your studio.

Run your dullest, most sterile mic through the VT-737sp and you'll be amazed at how warm and sweet it sounds. This 2-rackspace combo brings a new standard to high-end audio, taking your sound to places you never thought possible and giving you precise creative control.

The VT-737 will energize your recordings! Avalon VT-737sp Channel Strip at a Glance. Class A preamp design with three input selections. Opto-compressor with minimum signal path.

Sweepable EQ and hardwired bypass. The VT-737sp has three input selections: First, it features a higher-performance microphone input transformer with 48-volt phantom selection. Second, the VT-737sp offers an instrument DI high-source input with a jack located on front panel.

Finally, the VT-737sp includes a balanced line input with discrete high-level Class A circuitry. A high-gain switch boosts the overall gain of the preamplifier. The four high-quality tubes are configured as singled-ended anode coupled followers. A passive/variable highpass filter and hardwired relay bypass completes the VT-737sp's input signal conditioning. A phase reverse relay is available on all three inputs.

The VT-737sp's opto-compressor features a minimum signal path design with twin Class A vacuum tube triodes for gain matching. The optical attenuator acts as a simple passive level controller. Full dynamic control from soft compression to hard- knee limiting can be achieved with threshold, ratio-compression, attack and release controls plus gain reduction selection on the large VU meter.

Special spectral control including de-ess is available with the dual sweep mid EQ to side-chain switch. The VT-737sp's EQ section can be flipped pre or post the opto-compressor via a front-panel switch for alternate effects and tone shaping. Two VT-737sps can be linked via a rear panel link cable for stereo tracking.

The compressor bypass is a sealed silver relay for the most direct signal path. The VT-737sp equalizer utilizes 100% discrete, Class A-high-voltage transistors for optimum sonic performance. The high- and low-frequency bands provide the smooth characteristics of an all passive design, while the dual mid bands include variable frequency and switched Q-width selection. The enhanced range of the VT-737sp's mid bands is extended into the high and low bands by the use of X10 frequency multipliers. The bypass switch incorporates a sealed silver relay for the most direct signal path.

When the EQ to sidechain is engaged, the high-low EQ remains in the audio path for tone enhancement. The output level control provides a variable control of the overall signal path. The output amplifier utilizes another dual triode vacuum tube driving a 100% discrete, Class A, high-current, balanced and DC coupled low noise output amplifier. Avalon VT-737sp Channel Strip Features.

Vacuum tube and discrete design. Ideal for DAW and digital recording.

Wide range of tube tone and control. The Avalon VT-737 - Let your mics perform better than they ever have before! The item "Avalon vt-737sp Pre-Amp" is in sale since Tuesday, February 16, 2021. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Preamps & Channel Strips".

The seller is "kirmo2210" and is located in Tuskegee, Alabama. This item can be shipped to United States.
Avalon vt-737sp Pre-Amp