DBX 286S Mic Preamp Channel Strip. 286s is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer? The sonically pristine dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy.
Compressor to transparently smooth out uneven acoustic tracks or deliver that classic "in your face" vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser.Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps. The dbx 286s offers a full compliment of metering and status LEDs to visually guide you to achieving the right sound.
The floating balanced XLR Mic Input accepts balanced or unbalanced inputs to easily connect to professional and home studio microphones. The additional 1/4 TRS Line Input can accept balanced/unbalanced signals to process live electronic instruments or pre-recorded tracks at mixdown. Use the Insert jack to interface between the Mic Preamp and the signal processing sections to "loop out" to external processors (such as EQ or delay unit) or to mix the Mic Preamp's signal out to an external destination. The cost and hassle of patching together multiple processors for use on one track can be frustrating.
The dbx 286s provides you with all the mic processing you need in one box, with the shortest, cleanest signal path to keep your music sounding its best! Classic dbx OverEasy compression puts great sound within easy reach. Frequency tunable de-esser reduces sibilance and high frequency distortion. Enhancer increases the detail and definition of the high and low frequencies. Insert path allows you to add external processors.
Full compliment of meters and status LEDs. Floating balanced, Pin 2 Hot.
0.25Vrms, Gain = 30dB. +48VDC, applied to XLR pins 2 and 3 through 6.81k. 125dBu, 22Hz-22kHz, 150 source impedance. Normalled tip is Send, ring is Return. 20Hz to 20kHz, +0.5/-0.5dB.
>4:1 For input levels beyond 20dB above threshold. Program-Dependent >1s for small level increases, down to 10ms for larage increases.
Program-Dependen adjustable between approximately 1dB/sec and 75dB/sec. 800Hz to 10kHz High Pass, 12dB/octave.Program-controlled shelving equalizer, approximately 15dB maximum HF boost. Adjustable 1.5:1 to 10:1.
Program-Dependent, approximately 2mS (at maximum attenuation). DO: 120VAC 60Hz, 100VAC 50/60Hz EU: 230VAC 50/60Hz.
Also, Items which we do not normally stock i. "Special Orders", discontinued products, close-outs, used products, etc. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. You can feel confident when purchasing from eStudioStar.We sell ONLY factory-sealed products, and are an Authorized U. Dealer for all of the brands that we carry. They will help you with any questions you may have on product choice, and work to get you the best prices available. The item "DBX 286S Mic Preamp Channel Strip" is in sale since Tuesday, June 13, 2017.
This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Signal Processors/Rack Effects". The seller is "e_studio_star" and is located in Las Vegas, Nevada. This item can be shipped worldwide.