Balanced XLR Line Input Impedance: 10 kOhms. Unbalanced 1/4 Direct Input Impedance: 10 Meg Ohm. Hi-current drive Direct XLR output Impedance: 50 Ohms.
Silent conductive plastic INPUT attenuator. Microphone preamp high pass filter starting at 120Hz with a 6dB/8va slope. Compressor Maximum GAIN REDUCTION: 16 dB. Compressor ATTACK time: 60ms slowest CCW, 30ms at 12:00, 5ms fastest CW for 6dB compression. Compressor RELEASE time: 1.5s slowest CCW, 1s at 12:00, 100ms fastest CW from 6dB compression.
Maximum Preamp Output (Insert Send): +22 dBu into 600 Ohms. Maximum Main Output: +20 dBu. Insert Send output impedance: 50 Ohms. Insert Return input impedance: 13 kOhms.
Main Output Impedance: 50 Ohms. Direct Output Headroom (referenced to +4 dBv): 31 dB. Main Output Headroom (referenced to +4 dBv): 16 dB. Frequency Response: 10 Hz to 20 kHz ±0.5 dB.Large LED illuminated VU METER. Meters switch to read Direct Output (1) from preamp, Output (2) from Main Out, or Compressor Gain Reduction. Noise Floor (Gain set to minimum): -70 dB wideband typical. Gain via Microphone Input: 40 or 60 dB. Gain via Line Input: 20 or 40dB. Maximum Gain of EQ & Limiter section: 10 dB.
AUTOMUTE warmup delay: 30 Seconds. Operating mains voltage: 90 to 254 VAC (internal universal supply).Dimensions: 19" x 3 1/2" x 7 (occupies 2u). Unit Weight: 8.3 lbs. The item "Manley CORE Channel Strip MINT CONDITION" is in sale since Thursday, November 02, 2017. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Preamps & Channel Strips". The seller is "equipmentbay88" and is located in Dublin, California. This item can be shipped to United States.