The RPQ2 is the tool of choice for all microphones whenever a true and pristine signal path is desired. With the RPQ2, you will never consider a source too quiet to record with a ribbon mic ever again. Passive ribbons with low output levels require preamps that supply a high level of output.If the preamp you use doesn't have enough clean gain, the mic signal may seem too soft or noisy which may be apparent when recording quiet acoustic guitars or strings, especially at a distance or with long cable runs. The RPQ2 eliminates this concern.
Two channels with 81dB of sweet and quiet JFET gain. High-frequency CurveShaperT EQ and low frequency proximity control. 63k ohm high-impedance circuitry providing better overall transients, frequency response, and higher output sensitivity. High-resolution, high-impedance front-panel 1/4 DIs.
Mic/Line mode with Post-Mic and Pre-EQ Inserts for convenient routing options. Switchable phantom-power and polarity reverse. Merchandise and packaging MUST be in the same condition as when received. Alto Music reserves the right to refuse any return if it appears the item has been used.Software (if unsealed or registered). Harmonicas, Mouthpieces, Earbuds/Earphones/Headphones(if unsealed), or any item that may come in contact with the mouth, ears or nose. There are no warranties for the following items. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Preamps & Channel Strips". The seller is "altomusic" and is located in this country: US. This item can be shipped to United States.