ART Digital MPA-II 2-Channel Tube Microphone Preamp with A/D Conversion

ART Digital MPA-II 2-Channel Tube Microphone Preamp with A/D Conversion
ART Digital MPA-II 2-Channel Tube Microphone Preamp with A/D Conversion
ART Digital MPA-II 2-Channel Tube Microphone Preamp with A/D Conversion

ART Digital MPA-II 2-Channel Tube Microphone Preamp with A/D Conversion

The ART Digital MPA-II delivers all of the same great features of the ProMPA with the added versatility of digital output. Like the ProMPA-II, each input circuit has 48v phantom power and features variable input impedance which can radically vary the overall performance of any high quality dynamic or ribbon microphone. The Digital MPA-II can be configured for dual mono or stereo operation with selectable mid/side mic support, summing the adjacent channel, to decode left/right signals. The input section of the Digital MPA-II operates at either a low or high plate voltage applied to the two integrated hand-selected 12AX7 tubes for wider variation of preamp tone and performance. ART Digital MPA-II 2-Channel Tube Microphone Preamp with A/D Conversion.

Large back-lit analog VU output meters display input or output levels while multi-colored LED arrays, with average or peak hold, show tube gain and digital output levels. In addition to XLR and 1/4 analog outputs, the Digital MPA-II features a high quality A to D converter which offers digital connectivity on S/PDIF, ADAT, or AES/EBU outputs.

A rotary control on the front panel allows selection of format and sample rates from 44.1 to 192 KHz and 16 bit dithering. There is also a push button for, and two wordclock jacks, allowing loop-through. The Digital MPA-II comes in a standard 2 unit space rack-mountable steel chassis, with CNC routed black anodized aluminum face panel.

Variable Input Impedance For Flexible Microphone Voicing (150 Ohms To 2400 Ohms) Selectable Plate Voltage Large VU Meters Backlit Function Switches Discrete Class-A Input Microphone Preamplifier Low Noise at Lower Gain Settings Extremely Low Total Harmonic Distortion (THD) Wide Frequency Response Additional Front Mounted Instrument Input Jack Supports Mid/Side Miking Technique Operates at +4dbm/-10dbv Output Selectable Stereo/Dual Operation of Output Controls Automatic Instrument Input Selection 24-204KHz External sample rate 44.1K, 48K, 88.2K, 96K, 176.4K, 192K Internal sample rates 24/16 bit switchable dithering Wide dynamic range A/D Rotary Encoder for quick selection of sample rate Separate analog and digital output level controls Digital Level LED meters display both Average and Peak level ADAT optical I/O Sync to incoming ADAT data rate Switch selectable optical output (S/PDIF or ADAT) AES/EBU and S/PDIF outputs Two wordclock jacks allowing loop through. 800K Ohms (Instrument) Maximum Output Level: +27dBu (XLR) Output Impedance. 112dB "A" weighted (typical) A/D THD.

10K Ohms Power Requirements: USA - 105 to 125 VAC / 60 Hz Export units configured for country of destination Dimensions: (H x W x D in) 3.50 x 19.0 x 8.75 Dimensions: (H x W x D mm) 88 x 482 x 222 Weight: (lb/kg) 10.5 / 4.7. For example, if your order is placed AND paid for at 1 p.

Store Policies If you're not satisfied, neither are we. Be in brand-new condition, showing no signs of wear or use such as belt-buckle or pick scratches, scuffs, dings, or scrapes on the instrument or collateral materials.

This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Preamps & Channel Strips". The seller is "musiciansfriend" and is located in this country: US. This item can be shipped to United States.


ART Digital MPA-II 2-Channel Tube Microphone Preamp with A/D Conversion