Avalon VT 737-SP #15007: Mono tube mic pre/EQ/compressor channel strip The Avalon VT-737SP features a combination of tube preamplifiers, opto-compressor, sweep equalizer, output level and VU metering in a 2U space. Preamplifier The VT-737SP has three input selections: 1. The VT-737SP features a higher-performance microphone input transformer with +48v phantom selection. Instrument DI high source input with jack located on front panel.
Balanced line input, discrete high-level Class A. A high gain switch boosts the overall gain of the preamplifier. The four high quality tubes are configured as singled ended anode coupled followers. A passive-variable high pass filter and hard-wire relay bypass completes the input signal conditioning.
The phase reverse relay is available on all three inputs. Opto-compressor The opto-compressor features a minimum signal path design with twin Class A vacuum tube triodes for gain matching. The optical attenuator acts as a simple passive level controller. Full dynamic control from soft compression to hard-knee limiting can be achieved with threshold, ratio-compression, attack and release controls plus gain reduction selection on the large VU meter.
Special spectral control including de-ess is available with the dual sweep mid EQ to side-chain switch. The EQ section can be flipped pre or post the opto-compressor via a front panel switch for alternate effects and tone shaping. Two VT-737SPs can be linked via a rear panel link cable for stereo tracking.
The compressor bypass is a sealed silver relay for the most direct signal path. Sweep-Equalizer and Output Level The VT-737SP equalizer utilizes 100% discrete, Class A high-voltage transistors for optimum sonic performance. The high and low frequency bands provide the smooth characteristics of an all passive design, while the dual mid bands include variable frequency and switched Q-width selection. The enhanced range of the mid bands is extended into the high and low bands by the use of X10 frequency multipliers.
The bypass switch incorporates a sealed silver relay for the most direct signal path. When the EQ to sidechain is engaged, the high-low EQ remains in the audio path for "tone enhancement". The output level control provides a variable control of the overall signal path.
The output amplifier utilizes another dual triode vacuum tube driving a 100% discrete, Class A, high-current, balanced and DC coupled low noise output amplifier. Vacuum tube triode signal path. High-voltage circuits for maximum headroom to +30dB.
Internal discrete power supply with toroidal transformer. All discrete Class A equalizer with musical passive filter design. Sealed silver relays for signal routing.Large control knobs with professional conductive plastic potentiometers. VU meter for output level monitoring and compressor gain reduction.
Since 1993, we have been committed to equipping our customers with the very best gear, advice, and personal service anywhere. We believe that great sound can be achieved at any budget. We also believe that the ambitions of our customers should always come first.And over the years, those beliefs have turned customers into friends and family. Whether you're just starting out, or a seasoned pro, we're here for you, no matter where your audio travels may take you. Analog Outboard Gear - 1 Year. Microphones - 1 Year (excluding capsules, tubes, and ribbon elements). Speakers - 1 Year (excluding drivers).
Digital Outboard Gear - 30 Days. Note: Software is not returnable or refundable. What Are "Demo Deal" or "B-Stock" Products? Our Demo Deals and B-Stock products offer a unique opportunity to save big on near-mint condition, fully warrantied gear.These items have been opened for demonstration purposes and put back in the box without extended use. All original factory accessories and packaging are included.
This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Preamps & Channel Strips". The seller is "vintagekingaudio" and is located in this country: US. This item can be shipped to United States.