CASCADE DR-2 Double Ribbon Microphone Front Logo Slightly Off Center

CASCADE DR-2 Double Ribbon Microphone Front Logo Slightly Off Center
CASCADE DR-2 Double Ribbon Microphone Front Logo Slightly Off Center

CASCADE DR-2 Double Ribbon Microphone Front Logo Slightly Off Center

Grey body w/ Anodized silver grill. New Condition with front logo slightly off center.

DR-2 - Double Ribbon Microphone. Microphone in perfect working condition. Unlike offset ribbon designs, this microphone produces equal (but out-of-phase) response from the front and back sides of the motor, making it useful as the side channel in a mid-side setup, or within a Blumlein array. The ribbons are corrugated aluminum measuring 1.5'' in length and 0.15'' in width, mounted parallel 5/8'' apart. The design intent of using two ribbons is to increase sensitivity.

The ribbon motors are housed within a mesh grille. The mic provides no other screening or blast filtering, which likely has the benefit of reducing unwanted resonance but does expose the ribbon elements to contamination. The use of a pop filter when tracking vocals is recommended.

The frequency response is slightly elevated from 40Hz to 100Hz, flat through 4000Hz, and rolls off through 15,000Hz. Type: Dual Ribbon (velocity) Microphone. Ribbon type: 99% Pure aluminum, 2.0 micron. Polar pattern: Figure 8 Symmetrical design.

Frequency Response: 25Hz to 9KHz. Sensitivity: -56 db +/- 2 dB (0 dB=1V/Pa). Recommended load impedance: >1000 Ohms. The item "CASCADE DR-2 Double Ribbon Microphone Front Logo Slightly Off Center" is in sale since Thursday, October 05, 2017. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Microphones & Wireless Systems". The seller is "cascademicrophones-b-stock" and is located in Olympia, Washington. This item can be shipped worldwide.
CASCADE DR-2 Double Ribbon Microphone Front Logo Slightly Off Center