For moments when that extra bit of preamp character is required, rather than use a transformer and learn to live with its sonic drawbacks, Cranborne Audio developed Mojo - two discrete analogue saturation styles that transform Camden 500 into the fattest, warmest, and most characterful preamp in your arsenal - all at the turn of a dial. Perhaps best of all and unlike transformer and other legacy designs, Mojo can be subtle, it can also be exaggerated, but it can also be bypassed when complete transparency is required for the session. Clean, Precise, and Natural - at all gain positions. Whilst preamp specifications often quote fantastic figures at specific gain values, when the gain is increased, those figures often change radically. Camden 500 was designed to retain all of its impressive performance specifications at all gain positions from 8dB to 68dB.
This means that even when the preamp is running at maximum gain, the Phase and Frequency response remains linear and THD always remains inaudible - enabling all gain positions to be usable for any source and mic combination. Vintage, Warm, and Coloured - thanks to Mojo. Mojo is a new type of saturation circuit that consists of an array of filters and discrete second/third order harmonic generators that allow precise emulation of the saturation and low-end reinforcement behaviours of vintage transformer and valve-based equipment. The key to Mojo is that it can be dialled in to taste; use subtle amounts for gentle saturation, or dial it in to well beyond the point that destructive clipping would usually occur in transformer-based preamps. Perhaps the very best part of Mojo is that it can be bypassed to reveal the pristine base sound of the Camden 500.
Thump is a style that works best on - but is not limited to - low-frequency based instruments. Thump excites low-end content by boosting harmonics in the range of 100Hz to 20Hz and below without increasing the fundamental frequencies - resulting in fuller low-end on all reproduction mediums. As Thump is not EQ-based, the additional harmonic content is shaped by the source and it's existing low-end frequency content resulting in a natural addition of extra "Thump". Similar-sounding EQ moves will result in extreme wooliness as all sonic energy is boosted - even unwanted audio in-between the hits.Cream introduces a vintage smoothness that enables tracks to sit deep within a complex mix in a way that cannot be replicated with EQ. The Cream setting drastically increases THD whilst smoothing-out the low-mids. As with Thump, Cream is not EQ based and is purely achieved by blending 2 saturation stages with the dry signal and additional harmonics. Cream varies entirely on the harmonic signature of the incoming source.
It will increase high-end forwardness and create unique harmonic-based tonal shaping effects on mid-range instruments, but it will also add low-end on full range sources as well as unique "compression-style" effect on transients. Fully-discrete, transformerless design featuring custom'Camden' preamp topology designed by Cranborne Audio's Director of Engineering - Edward Holmes.Optimised Input Impedance and input headroom for Mic, Line, and HI-Z sources. Optimised for and fully-compliant with the 500-series format.
Audio performance at the near-theoretical limits of noise, distortion, and phase/frequency linearity at all gain settings. 1000 kHz, 35dB gain, ±1dB.
RGB Signal Level LED with integrated Clip indicator. 48v LED Lights Orange to indicate voltage charging or dissipating to prevent damage to ribbon microphones and to ensure voltage is fully charged before use.
48v LED lights RED when voltage is fully charged and ready to use. Mojo analogue saturation circuits with variable control, true bypass, and 2 discrete styles - Thump and Cream. Thump excites low-end content by boosting lower odd/even harmonics from a range of 160Hz to 20Hz and below.
Cream boosts odd/even harmonics whilst also reducing the amplitude of the fundamental frequencies and applying typical transformer-style transient taming. Reamp line-level tracks from your DAW through Mojo to apply analogue saturation to your stems, VST, and stereo mixes.Gold Flashing on backplane contacts for increased conductivity and durability. Designed and Engineered in the UK. Merchandise and packaging MUST be in the same condition as when received. Alto Music reserves the right to refuse any return if it appears the item has been used. Software (if unsealed or registered). Harmonicas, Mouthpieces, Earbuds/Earphones/Headphones(if unsealed), or any item that may come in contact with the mouth, ears or nose. There are no warranties for the following items.