The addition of a variable impedance circuit allows ISA users to perfectly match the preamp with any microphone, or to use different settings creatively to shape the sound of the microphone. Unchanged for decades, the ISA microphone preamp topology offers incredible clarity and the signature Focusrite sound that makes it the top choice among many audio professionals today.
The optional class-leading eight channel A-D converter option used with the ISA828 is also compatible with the ISA428 MkII. Along with the four mic preamp inputs, four additional inputs allow you to route other line signals through the converter. High quality Burr-Brown Pro Audio Amplifiers and flagship PCM4220 A-D converter chips seated within Focusrite custom analogue circuitry deliver unparalleled performance. Specifications include a dynamic range of 122dB and jitter performance below 250 picoseconds. The card can be retrofitted at any time. Thanks to its convenient 25-pin D-Type connector, it integrates seamlessly with most digital workstations, including Pro Tools. Four instrument inputs, instantly accessible on the front panel, allow quick and easy connection without the need for a separate DI box. Extra processing can be placed between preamp and conversion via the units dedicated insert points, featured on every channel. Finally, accurate six-segment LED metering is designed to catch even the fastest transients on every channel. Over 25 years, Focusrite has earned a reputation for bringing superb audio quality and engineering excellence to an array of audio professionals.Whether you're looking to preserve the sound of your classic microphones, or searching for the perfect front end for your digital studio, the ISA428 MkII brings legendary tools to your studio at an exceptional new price. The ISA microphone preamplifier was first introduced back in 1985. This transformer-based preamplifier formed the first half of the ISA110 mic pre and EQ module on Focusrite's critically acclaimed Forté console. This console, and the later Studio console were hailed by many as the finest sounding consoles ever built. The ISA microphone preamplifier went on to form the cornerstone of all ISA and RED Focusrite products.
The topology has never changed, except for the addition of a variable impedance circuit, allowing ISA users to either perfectly match the preamp with any microphone, thus maximizing level, or to use different settings creatively to shape the sound of the microphone being used. The original ISA110 setting was supplemented by three further impedance settings. The Focusrite preamp is renowned for its transparency, but there's also a subtle warmth that transformer core saturation contributes. This seeming contradiction of warmth plus beautifully open, unrestricted high frequencies, is a classic hallmark of the mid 80's Focusrite designs.
With processors whose bandwidth is strictly limited to the audible (20Hz to 20kHz) bandwidth alone, significant roll-off can still occur, affecting the higher audible frequencies of the signal. Therefore, in order to capture every subtle nuance, exactly as it occurs whilst avoiding any roll-off, the preamp must operate over a far greater bandwidth. The extremely broad frequency response of Focusrite preamps - close to 200kHz at the top end - guarantees accurate phase response across the much narrower range of human hearing, the roll-off point being moved entirely outside of the audible hearing range. Four ISA series transformer-based preamps? ISA series mic preamps have been the producers' choice on countless hit records over the last two decades.Four additional A-D converter inputs allow eight channels of high-quality conversion, with a dynamic range of 122dB and jitter performance below 250 picoseconds. Ideal for mic matching or extended microphone creativity. Settings include the'Vintage ISA110' setting, providing the original Focusrite signature sound.
Four front panel instrument inputs? Instant access on the front fascia - no separate DI box required. Switchable insert points are featured on every channel, allowing routing (between pre-amp and output) through additional external processing. Variable high pass Focusrite filter?Provided on every channel, this is the same filter as featured on the original ISA428. Accurate LED meters for every channel?
Clear metering designed to catch even the fastest and most elusive of transients. Phantom power available on every channel. Trim control allows 20dB of extra gain with fine adjustment. Phase reverse buttons help to correct phase issues with microphones or cables. Optional A-D converters easily synchronise to external word clock. Frequency response at minimum gain (0dB): -0.35dB at 20Hz and -3dB at 122kHz. Frequency response at maximum gain (60dB): -2.5dB at 20Hz and -3dB 103kHz.Gain range: 0dB to +60dB in 10dB steps, plus 0dB to +20dB continuously variable trim. THD+N: 0.0009% (measured at 1kHz -20dBu input signal, at 30dB gain setting, with a 20Hz/22kHz bandpass filter). Noise EIN: -126dB (measured at 60dB of gain with 150? Termination and 20Hz/22kHz bandpass filter). Noise at main output with unity gain: -98dBu (measured with a 20Hz/22kHz bandpass filter).
SNR: 123dB (relative to max output 25dBu). SNR: 120dB relative to 0dBFS (+22dBu). Frequency Response at unity gain (0dB): -0.3dB at 20Hz and -3dB at 94kHz. Gain range: -20dB to +10dB in 10dB steps, plus 0dB to +20dB continuously variable trim. THD+N: 0.002% (measured with +4dBu input signal, 0dB gain setting, with a 20Hz/22kHz bandpass filter). Noise at main output with unity gain: -91dBu (measured with a 20Hz/22kHz bandpass filter). SNR: 116dB (relative to max output 25dBu).SNR: 113dB (relative to 0dBFS +22dBu). Frequency Response at +10dB gain: -0.2dB at 20Hz and 0dB at 200kHz. Frequency Response at +40dB gain: -3dB at 20Hz and -3dB at 38.4kHz. Gain range: +10dB to +40dB continuously variable. THD+N: 0.006% measured with -20dBu input signal, at minimum gain (+10dB), with a 20Hz/22kHz bandpass filter.
Noise at main output with minimum gain (+10dB): -95dBu (measured with a 20Hz/22kHz bandpass filter). Roll off = 18dB per octave 3 pole filter.Frequency range: 16Hz to 420Hz (continuously variable, measured at the 3dB down point). 6 LED meter is calibrated 0dBFS = +22dBu (the maximum level which can be correctly converted by the optional internal A/D converter before overload occurs). The meter calibration points are as follows. Meter panel calibration value in dBFS / Equivalent dBu value.
Analogue Channel Inputs (Inputs 1-4). 4 TS jack inputs on front panel. 4 microphone XLR inputs on rear panel. 4 TRS jacks on rear panel. 4 TRS jacks on rear panel. 4 ADC XLR inputs on rear panel. Analogue Audio Outputs (Outputs 1-4). 4 line XLR outputs on rear panel. 4 TRS jacks on rear panel. IEC power input connector 100Vac - 240Vac. 8 output meters, 6 segment. 4 30-60 mic gain range selection indicator. 4 +48V phantom power indicator. 4 Input selection indicators (Mic, Line, Inst).4 Z In microphone input impedance selection indicators (Low, ISA110, Med, High) Clock select indicators (44.1, 48, 88.2, 96, 176.4, 192). Ext clock indicators (Lock, Word clock, 256X). Dimensions (W x H x D). 480mm (W) x 88mm (H) x 280mm (D).
19" (W) x 3.5" (H) x 11 (D). These charges are the buyers responsibility. The item "Focusrite ISA428 MKII MK2 4 Channel Mic Microphone Preamp" is in sale since Friday, April 22, 2016. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Preamps & Channel Strips". The seller is "altomusicpro" and is located in Middletown, New York. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY.