Grace Design Lunatec V3 2-Channel Mic Preamplifier and A/D Converter

Grace Design Lunatec V3 2-Channel Mic Preamplifier and A/D Converter. Scroll down for additional photos.

For sale is ONE (1) used Lunatec V3 preamp in good condition. Because we have a quantity of these, appearances may vary, but condition is guaranteed to be better or equal to pictured sample.

Power supply (adapter) is not included. We test using a spare or bench one.

The Lunatec V3 delivers the same transparent, high fidelity audio performance as the rest of our mic preamplifier line, while being conveniently DC powered and portable enough to fit in a shoulder bag and accompany you and a recorder anywhere you need to go. And when you get home, plug the lunatec V3 in and enjoy its immaculate audio performance in your studio.

Our ultra-low distortion, 24/192kHz A/D converter section is included as standard, with flexible outputs including S/PDIF, AES3 and TOSLINK (optional). Both single and dual-wire 176.4 and 192kHz AES/EBU modes are provided via a pair of XLR connectors, which enable connection to high sample rate dual-wire or single-wire digital recording systems. All outputs, analog and digital, are active at all times for even further capture flexibility. The V3 uses precision 11 position rotary gain switches, with 10dB output attenuators for fine level adjustment. Each channel has 48V phantom power and 2 position high pass filters (presetable at 50-100Hz or 75-150Hz with either 6 or 12 dB per octave slope). Plus, for engineers working with M+S mic technique, the lunatec V3 includes a M+S decoder matrix as standard. Fast, musical transimpedance amplifier architecture. Precision 11 position gold contact rotary switch gain controls. 10dB output trim controls for fine level adjustment. A/D converter with 44.1, 48, 88.2, 96, 176.4 and 192kHz sampling. ANSRT dither circuit for recording to 16-bit recorders. 2 position high pass filters presetable at 50- 100Hz or 75-150Hz with either 6 or 12 dB per octave slope. 8-segment dot mode LED level meters. You agree to all terms and condition. This means that the item has not been tested and therefore we cannot issue guarantees on such. Do not open case immediately as most errors can be fixed. Your satisfaction is our priority. Any issues must be brought to our attention within 30 days of your receipt of the item/s. All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.