Joe Meek VC1Q Channel Strip

Joe Meek VC1Q Channel Strip
Joe Meek VC1Q Channel Strip

Joe Meek VC1Q Channel Strip
The JOEMEEK STUDIO CHANNEL VC1 is a development of historic tried and tested circuits and designs from the 1960's to the present day, combined in a single outboard rack unit by acknowledged leaders in analogue technology. WHAT IT IS AND WHY:The JOEMEEK Studio Channel is the result of continuing experimental and development work carried out over a 5 year period to incorporate the best of historically excellent sounding technology in a single package to bring the finest possible sounds within the reach of the studios of today. It's best to think of the Studio Channel as five separate pieces of equipment:1 Input amplifier. The JOEMEEK Studio Channel has an uncompromising approach, it uses JOEMEEKs latest current sensing microphone input, allowing the use of virtually any microphone type while providing fantastic frequency response and the lowest possible noise and distortion. By using the finest components available for the purpose, and with proven high overload amplifier design developed over many years, the performance is startlingly good and silky smooth in sound. TECHNICAL SPECIFICATION MICROPHONE INPUT · XLR Input 3Kohm approx. To suit 200 ohm microphones. · Switchable 48V phantom power. · Input level from -70dB to 0dB · Push button MIC/LINE switch with LED indicator for'line'. · Push button 48V phantom supply switch with LED indicator.

LINE INPUTS · XLR input 10K impedance floating balanced. · Instrument input 150K impedance unbalanced.

OVERLOAD MARGIN · 30dB on Mic and Line inputs in normal operation. GAIN · Line in -6dB to 24dB · Instrument in 0dB to 35dB · Mic in 15dB to 70dB · Insert gain 10dB NOISE · Line in at least 80dB below operating level · Mic in at least 125.5dB below input at 50dB gain 20Hz to 20KHz across 200ohm load resistor.

Self noise approx -132dB HARMONIC DISTORTION · Generally within 0.01% rising to approx. 0.14% at 4dB above nominal output level. AMPLITUDE FREQUENCY RESPONSE · Line in 6Hz to 20KHz within 0.5dB · Mic in 8Hz to 20KHz within 1dB · High pass filter 3dB down at 75Hz, 12dB per octave. FILTER · Push button high pass filter switch (and indicator) operates at 75Hz at 12dB per octave.

OUTPUTS · High level balanced 50 ohm +4dBu for 0VU (variable) · Max. +26dBu · Insert, Tip and Ring jack socket. 400 ohm -10dBu output 22K ohm input. COMPRESSOR · Photoresistive servo operated · Ratio minimum approx.

1.5 to 1 · Ratio maximum approx. 8 to 1 (position 5) · Attack time 1mS min. (variable) · Release time 200mS min 3S max. (variable) ENHANCER · Performance details not released. · VC1Q version allows harmonic enhancement and de-ess effect. · Controls for Q, Drive and effect mix.

MEEQUALIZER · Shelving high and low frequency controls (8K and 100Hz) · Mid frequency cut/boost control · Mid frequency centre control (1KHz - 4KHz) · Bypass switch with indicator · Cut/boost levels approx 15dB POWER · 3.4 Watts. · IEC socket for power cable.

· Reversible fuse holder for 230VAC and 115VAC power input. HOUSING · 2U rack mounting totally enclosed aluminium case. The item "Joe Meek VC1Q Channel Strip" is in sale since Tuesday, May 15, 2018. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Preamps & Channel Strips".

The seller is "slavetosound" and is located in Broomfield, Colorado. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Uruguay, Barbados, Brunei darussalam, Bolivia, Guadeloupe, Iceland, Jordan, Cambodia, Sri lanka, Maldives, South africa.
Joe Meek VC1Q Channel Strip