Neve Bundle / 2 Neve 1073LBEQ & 2 Neve 1073LB MIc Pre

They have been sitting in my rack never used. Provides aNeve 1073 EQ circuit in a single 500-series module. The 1073 is widely considered the worlds premier mic preamp & EQ module, delivering the unique Neve sound featured on some of the most famous recordings of the past 40 years. The big, punchy sound of the classic Neve 1073 module complements any musical genre, from rock to rap, jazz to classical. Its lush sound with classic Neve signature makes it the consummate mic-pre/EQ module for recording vocals, guitars, and acoustic instruments of all descriptions.

With the 1073LBEQ module, the highly sought-after classic EQ sound is now available in a 500-series form-factor. When integrated with 1073LB preamp, the combination is 100% discrete and = genuine 1073 mic pre/EQ. Dropped on the studio world in 1970, Neves 1073 Audio Preamplifier immediately made its bones on the recording studio scene.

Renowned for its ability to capture, complement and create a uniquely great sound no matter the source, the 1073 has been the go-to recording preamp of leading artists and producers from hit recordings too numerous to mention. If you think of any famous recording of the past 40 years, chances are more than good that the artists' voices, instruments or illegal activities first saw tape through a Neve 1073. And now it is available for your Lunchbox Todays 1073LB is still manufactured in Great Britain to the exacting specs of Neves classic 1073 preamp.

Featuring painstakingly recreated original spec hand-wound input and output transformers, matched components, as well as specially recreated tantalum coupling caps, the 1073LB bathes your ears in vintage Neve glory. With a build quality the British Admiralty would approve, the 1073LBs massive input level switch contacts are gold-plated to withstand decades of marathon tracking sessions.

As magical as owning a rare piece of vintage kit can appear, the lack of modern conveniences can ultimately detract from the recording experience. Thats why the boffins at Neve gave the 1073LB switchable microphone input impedance, signal presence LED and intelligent protected switching on the front combi-XLR input connector so you dont accidentally fry a line-level device with 48v. The new Fine Trim control lets you squeeze the maximum level of sparkling clean signals or crank the gain for some Revolution distortion. The 1073LB Preamps smart Audio Processing Input design and Lunchbox Insert architecture allows you to create a classic Neve 1073 channel strip when used with a Neve 1073LB Series EQ.

And all this sonic potential installs in an empty slot of your compatible Lunchbox rack, ready to inject your microphone or line level signals into that legendary universe of Neve sound. Classic transformer microphone preamp amp (Class A design). Audio path is absolutely 100% discrete and the same design as the 1073 Classic module mic/pre circuit.

Both Mic and Line inputs are transformer balanced and earth free. Gain knob with Signal Presence LED. +5/-10dB level Trim control with integrated phantom power on/off switch.

Phase, Impedance and Front Input selector switches. Front combi-XLR connector with intelligent switching of phantom power. Audio Processing Insert design allows processing from adjacent Neve modules in same Lunchbox to be inserted into the 1073LB's pre-output stage. Microphone Input: Gain -80db to -20dB in 5dB steps. Line Input: Input impedance 4k ohms bridging, gain -20dB to +10dB in 5dB steps.

Output is transformer balanced and earth free. Distortion: Not more than 0.07% from 50Hz to 10kHz at +20dBu output (80kHz bandwidth). Freq Response: ±0.5dB 20Hz to 20kHz, -3dB at 40kHz. Crafted in England by Neve engineers.

Rotary controls provide accurate adjustment of the 1073 3-band EQ and High Pass Filter. Signal presence LED illuminates green from a level of -25dB and red from a level of +24dB. Switch for EQ IN/OUT function, with LED indication. Electronically balanced classic Neve circuits used in Line Input and Line Output stages for standalone module use. These stages are bypassed and the 1073LBEQ module is 100% discrete when combined with the1073LB mic preamp.

Audio Processing Insert design allows the audio to/from the1073LBEQ module to be inserted into the audio path of an existing 1073LB (modules must be fitted in the same rack). High frequency concentric knobs perform two functions: HF shelf control and High Pass Filter control. Fully screened module packaged in Mu-metal case eliminates stray electromagnetic fields from Lunchbox PSU or other module types. The 1073LBEQ provides the legendary sound of Neve in a remarkably simple format. A Line level input feeds an electronically balanced EQ circuit with 3-bands of adjustable EQ and a High Pass filter, which can easily be switched in/out.

The output is also an electronically balanced Line level output. A signal presence LED and Neves clever Audio Processing Insert design is also integrated into the module. The 1073LBEQ can be modified to work as an inserted process with an existing 1073LB mic pre module. A modification is required inside both units and a cable, which is supplied with the 1073LBEQ module, is needed to connect the LB mic pre to the LB EQ. The result of this is a.

Genuine 1073 mic/pre input -> EQ ->. Output audio path when in this mode. This mono unit is the perfect solution for studios and audio engineers looking to bring in the very essence of the Neve 1073 EQ sound to their portable racks. Work with the A Designs 500HR 2 Slot rack or the Empirical Labs EL500 2 Slot 500 Series Rack.

The item "Neve Bundle / 2 Neve 1073LBEQ & 2 Neve 1073LB MIc Pre" is in sale since Friday, January 20, 2017. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Preamps & Channel Strips". The seller is "dlkjet" and is located in Los Angeles, California. This item can be shipped to United States.

Brand: Neve
Type: Microphone Preamp
Model: 1073