Sebatron VMP-4000e valve microphone preamplifier

Sebatron VMP-4000e valve microphone preamplifier
Sebatron VMP-4000e valve microphone preamplifier
Sebatron VMP-4000e valve microphone preamplifier
Sebatron VMP-4000e valve microphone preamplifier

Sebatron VMP-4000e valve microphone preamplifier
Legendary Sebatron VMP-4000e four channel valve microphone preamplifier. Less than ten months old. Includes manual , power lead and original packing. The Sebatron Valve Microphone Preamplifier has been designed to bring back that Classic tone to digital recording and multitracking. The Sebatron VMP series (Valve Microphone Preamplifier) is available in two channel (with or without VU) and four channel formats...

The vmp-2000e , vmp-2000eVU and vmp-4000e. All circuitry is High Voltage Discrete Class A for optimal headroom, wide audio bandwidth and maximum transient response. The valve Anode Voltage is approximately +300VDC. Microphone inputs are transformer coupled for an organic'pleasant to the ear' flavour and all signal gain is provided by the valves.. Direct Inputs are available for Bass, Guitar, Keyboards and running line level signals through etc.

The two-band switched Passive Equalization network and variable colour control via the Pad switches allow the user to carefully sculpt the signals when dealing with the clinical and lifeless quality of Digital (or otherwise) recordings. Such is the organic quality and musical colouration of the VMP series circuit that they are often used to run stems (sub mixes) or full mixes through to obtain that characteristic'Analog glue' that Digital recording systems simply cannot produce. Sebatron preamplifiers are being used everyday by Professional hi end audio studios all around the world. Channel Single Ended Class A 12AT7 Triode Gain Stage, Discrete Solid State Class A balanced output. Transformer Balanced Microphone Input - Unbalanced Direct Input.

(-25dB pad'air' activated) 10hz-110khz +/-2db. 482mm x 190mm x 88m. Externally switchable 110/120/220/240 VAC for global useage. Chassis is 1.2mm mild steel powder coated'Textured Black'.

Front Panel is 2.5mm mild steel powder coated. Topology is all discrete and Class A Valve and Solid State signal path running on +300V and +60V rails respectively.

Class A Discrete and low noise. Dual Triode 12AT7/ecc81 and High Voltage Silicon Transistors. The item "Sebatron VMP-4000e valve microphone preamplifier" is in sale since Tuesday, March 3, 2020.

This item is in the category "Musical Instruments\Pro Audio\Preamps & Channel Strips". The seller is "goodimart" and is located in Ivanhoe, VIC.

This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.
Sebatron VMP-4000e valve microphone preamplifier